View IR2E46U6_223818.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

LED
LED LAMPS
Resin type
LED LAMP
(I F = 20 mA*1, Ta = 25C)
KG
Green
EG
Yellow-green
FG
Yellow-green (HL)
HY
Yellow
HS
Sunset orange
HD
Red
PR
Red
Luminous intensity (mcd) TYP.
Luminous intensity (mcd) TYP.
Luminous intensity (mcd) TYP.
Luminous intensity (mcd) TYP.
Luminous intensity (mcd) TYP.
Luminous intensity (mcd) TYP.
(555 nm) GL3KG8
(565 nm)
(565 nm)
(585 nm) GL3HY8
(610 nm)
(635 nm)
(695 nm)

30 GL3EG8 GL3EG41
60 130 130 38 65 18 18 25 100 20 150 160 160
55 GL3HS8
60 GL3HD8
40 GL3PR8
GL3KG44 GL3KG43 GL3KG62 GL3KG63
60 GL3EG44 20 GL3EG43 22 GL3EG62 6 GL3EG63 LT3E31W*2
GL3HY44 GL3HY43 GL3HY62 GL3HY63
100 GL3HS44 25 GL3HS43 40 GL3HS62 16 GL3HS63 15 25 LT3S65W*2 110 GL4HS8
100 GL3HD44 25 GL3HD43 40 GL3HD62 15 GL3HD63
110 GL3PR44 25 GL3PR43 50 17 GL3PR63 15 LT3P31W*2
o3

LT3H31W*2 LT3H65W*2
GL4HY8
LT3D31W*2
25 LT3D65W*2 80 GL4HD8 GL5HD4
LT3E65W*2 GL4KG8 30 GL4EG8 GL5EG4 GL5KG8 60 GL5EG8 70 GL5EG41 70 GL5EG44
25 LT3P65W*2 110 GL4PR8 25 GL5PR4 80 GL5PR8 150 GL5PR41 100 GL5PR44
o4 Cylinder

GL5HY8 GL5HY41 GL5HY44
120 GL5HS8 100 GL5HS41 100 GL5HS44
80 GL5HD8 100 GL5HD41 100 GL5HD44
GL5KG41 GL5KG44
o5
GL5EG261B0SB 150
GL5EG40 250 300 GL5FG43 23 120 15 GL5HS47 6 GL5HY40 600 GL5HY43 250 GL5HS40 250 GL5HS43
GL5HD261B0SB 80 GL5PR261B0SB 15
200 GL5HD40 250 GL5HD43 GL5HD60 250 GL5PR40 300 8 35

GL5KG43
120 GL5EG43 GL5EG60
GL6EG11T*3
GL5EG47

GL6EG26T*3 140
GL2EG6 GL8EG2 15 30 50 5 28 12 12 6 8 8 6 GL8HY42 GL8HY5 GL8HY25 GL8HY29 GL8HY23 GL8HY21 GL8HY26 GL8HY22 6 25 12 GL8HS25 10 GL8HS29 8 8 8 5 GL8HS22 5 GL8HS21 8 GL2HY6 12 GL2HD6 GL8HD2 GL8HD4 GL8HD42 GL8HD5 10 GL8HD25 7 GL8HD23 GL8HD21 GL8HD26 GL8HD22 6 8 8 8 GL8PR21 GL8PR26 GL8PR22 GL8PR28 0.7 0.7 1.2 0.9 12 GL2PR6 30 40 5 22 12 GL8PR25 GL8PR29 1.5 3 GL8PR42 0.7 1.5
Convex
Arch
o2
2.5 x 5.0 2.0 x 3.1 1.8 x 3.9 1.9 x 3.9

GL8EG4 GL8KG42 1.5 GL8EG42 GL8EG5 GL8KG25 GL8KG29 9 5 GL8EG25 GL8EG29 GL8EG23 GL8KG21 GL8KG26 GL8KG22 4 4 GL8EG21 GL8EG26
Rectangle
2.0 x 3.2 2.0 x 3.2 2.0 x 4.5 2.0 x 5.0

Square 5.0 x 5.0 Triangle Isosceles triangle
3.5 GL8EG22
*1 PR series (Red): I F = 5 mA (GL8PR25, GL8PR29: IF = 10 mA) *2 Taped model *3 With tie-bar HL: High-luminosity
Taped model is also available.
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
97
LED
o5 (Inverted cone) Long: 5.8 Oval Short: 4.6
GL5HD47
8
Luminous intensity (mcd) TYP.
8 12 3 2 1.5 3 15 3 15 15 15
Radiation shape (mm)
Colored diffusion Colored transparency Colorless transparency Milky diffusion
Appearance
LED LAMP
Cylinder
LED
GL3PR8 series
GL3PR44 series
GL3HY43 series
GL3KG62 series
LT3E31W series
GL3PR63 series
LT3E65W series
GL4PR8 series
GL5PR4 series
GL5HS8 series
GL5KG41 series
GL5PR44 series
GL5EG40 series
GL5HY43 series
GL5EG60 series
GL6EG11T
GL5HD47 series
Oval
Convex
Arch
GL6EG26T
GL2HY6
GL8EG2 series
GL8HD4 series
Rectangle
GL8KG42 series
GL8KG25 series
GL8HY29 series
GL8HD23 series
GL8HS21 series
GL8HY26 series
Square
Triangle
GL8HD22 series
GL8PR28
98
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LED
DICHROMATIC LED LAMPS
Resin type Appearance
DICHROMATIC LED LAMP
(The values in luminous intensity are radiation color order) (I F = 20 mA*1, Ta = 25C)
E JJ
Yellow- + Orange green (HL)
CU
Luminous intensity (mcd) TYP.
EP
Yellow- + Red green
ED
Yellow- + Red green
EH
Yellow- + Yellow green
HP
Yellow + Red
Luminous intensity (mcd) TYP.
Luminous intensity (mcd) TYP.
Luminous intensity (mcd) TYP.
Luminous intensity (mcd) TYP.
o3 Cylinder

GL5EJJ502C0X* 2 110/170 GL5CU44
GL5EP5
o5
100/240 120/250

GL3ED8 40/9 GL5ED5 GL5ED44 GL5ED60 GL8ED5 GL9ED2 GL9ED4
20/15 40/25 80/50 11/8 10/6.5 8/3 GL9EH2 7/4
GL5HP5
GL6CU7

1.9 x 3.9 2.0 x 5.0 5.0 x 5.0
Rectangle
6/2
GL8HP5 GL9HP2
3/1.5 1/0.8
CU series: Common anode pin connection
*1 P (Red) and H (yellow): IF = 10 mA
*2 Taped model
HL: High-luminosity
GL3ED8
GL5EJJ502C0X
GL5ED5 series
GL5ED44 series
GL5ED60 series
GL6CU7
GL8HP5 series
GL9ED2 series
GL9ED4
Luminous intensity (mcd) TYP.
15/9
Colored diffusion Colored transparency Colorless transparency Milky diffusion
Radiation shape (mm)
Yellow- + Red green (HL)
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
99
LED
HIGH-LUMINOSITY CHIP LED
HIGH-LUMINOSITY (AlGaInP) CHIP LEDs (Taped models only)
Resin type Outline dimensions (mm)
LED
New product Under development
(I F = 20 mA, Ta = 25C)
Colorless transparency
Colored transparency
ZG
Green
ZE JE
Luminous Yellow-green Luminous intensity intensity (mcd) (mcd) TYP. TYP. GM1JE35200AE*1 GM1JE55200AE*1 13 13 25.4
Colored diffusion
ZV JV YV
Amber
ZS JS YS
Sunset orange
ZJ JJ YJ
Orange
ZR JR
Red
Milky diffusion
Luminous intensity (mcd) TYP.
Luminous intensity (mcd) TYP. 19 20.9 123.2 75 14.1 144.1 78 12 290 90
Luminous intensity (mcd) TYP. 19 19 123.3 75
Luminous intensity (mcd) TYP. 13
1.6 x 0.8 (T: 0.35) 1.6 x 0.8 (T: 0.55) 1.6 x 0.8 (T: 0.8)

GM1JV35200AE*1 18.8 GM1JV55200AE*1
LT1ZV67A
GM1JS35200AE*1 GM1JS55200AE*1
LT1ZS67A
GM1JJ35200AE*1 GM1JJ55200AE*1
LT1ZJ67A
GM1JR35200AE*1
16.8 78.7 75 16.5 92.7 60 11 170 80
LT1ZG67A
6.1
LT1ZE67A
LT1ZR67A
73.9 55
GM1ZV80300AE
LT1JV67A*1 LT1ZG40A
GM1ZS80300AE
LT1JS67A*1 LT1ZS40A
GM1ZJ80300AE
GM1ZR80300AE
6.2
LT1ZE40A
28.2
LT1ZV40A
LT1ZJ40A
127.8 60 9.5 200 70 500
LT1ZR40A
78.7 55
2.0 x 1.25 (T: 0.8)

GM1ZV40300AE GM1JV40300AE
LT1ZG95A
GM1ZS40300AE GM1JS40300AE
LT1ZS95A
GM1ZJ40300AE GM1JJ40300AE
LT1ZJ95A
GM1ZR40300AE
3.2 x 2.8 (T: 1.9) 6.0 x 5.0 (T: 2.5) 6.0 x 5.0 (T: 2.3) (board insertion type) 1.6 x 1.15 (T: 0.8) (Side emitting) 2.7 x 1.3 (T: 1.2) (Side emitting)
*1 *2 *3 *4
15
LT1ZE95A
45
LT1ZV95A
GM5ZR95200AE 100
GM5JV95200AE
GM5JS95200AE
GM5JJ95200AE GM5ZJ01200A*3
GM5ZV01200A*3 500 GM5YV01210A*4 1 300 GM5ZV03200Z*3 500 GM4JV81200AE*2 35
GM5ZS01200A*3 700 GM5YS01210A*4 1 700 GM5ZS03200Z*3 700 GM4JS81200AE*2 40
GM5ZR01200A*3 400
GM5YJ01210A*4 1 500 GM5ZJ03200Z*3 GM4JJ81200AE*2 500 40 GM5ZR03200Z*3 400 GM4JR81200AE*2
GM4JR81250AE*2
30 (45)
LT1JV45A*1
20
LT1JS45A*1
24
LT1JJ45A*1
16
LT1JS67A, LT1JV67A, GM1JV55200AE series, GM1JV35200AE series, GM1JV40300AE series, LT1JV45A series: IF = 5 mA GM4JV81200AE series: IF = 10 mA GM5ZR01200A series, GM5ZR03200Z series: IF = 60 mA GM5YV01210A series: IF = 90 mA
100
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LED
Resin type Outline dimensions (mm) Milky diffusion Colored transparency Colorless transparency
HIGH-LUMINOSITY CHIP LED
New product Under development
(I F = 10 mA, Ta = 25C)
HIGH-LUMINOSITY (InGaN) CHIP LEDs (Taped models only)
BC
Blue Luminous intensity (mcd) TYP.
GC
Green Luminous intensity (mcd) TYP. GM1GC35200AC 54
Colored diffusion
1.6 x 0.8 (T: 0.35) 1.6 x 0.8 (T: 0.55) 3.2 x 2.8 (T: 1.9)

GM1BC35370AC*1 GM1BC55270AC*1
23 23 73 120 370 200 300 550 200 300 50 12
GM4GC81250AC
GM1GC55200AC GM5GC95200AC*2
GM5GC95250AC*2
47 311 500
GM5BC95200AC*2
GM5BC95250AC*2 GM5BC95270AC*2
GM5BC01200AC*3
GM5BC01250AC*3 GM5BC01270AC*3
GM5GC01200AC*3
GM5GC01250AC*3
520 1 200
6.0 x 5.0 (T: 2.5)

6.0 x 5.0 (T: 2.3) board insertion type 1.6 x 1.15 x 0.8 (Side emitting) 2.7 x 1.3 x 1.2 (Side emitting)

GM5BC03200Z* 3
GM5BC03210Z* 3 GM4BC81250AC
GM5GC03200Z* 3
520
170 46
GM4BC13300AC
GM4GC13300AC
*1 GM1BC35370AC, GM1BC55270AC: IF = 5 mA *2 GM5BC95200AC series, GM5BC95250AC series: IF = 20 mA *3 GM5BC01200AC series, GM5BC01250AC series, GM5BC03200Z series: IF = 50 mA
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
101
LED
CHIP LED
CHIP LEDs (Taped models only)
Resin type Colorless transparency Colored transparency
(IF = 20 mA*1, Ta = 25C)
LED
K
Luminous intensity (mcd) TYP.
E FEG
Luminous intensity (mcd) TYP. Yellow-green
H HY
Luminous intensity (mcd) TYP. 11.5 9.8 8.3 10.8
Milky diffusion
Outline dimensions (mm)
Colored diffusion
Green
Yellow
1.6 x 0.8 (T: 0.35) 1.6 x 0.8 (T: 0.55) 1.6 x 0.8 (T: 0.6) 1.6 x 0.8 (T: 0.8) 2.0 x 1.25 (T: 0.8) 3.2 x 2.8 (T: 1.9) 1.6 x 1.15 x 0.8 (Side emitting) 2.7 x 1.3 x 1.2 (Side emitting)

GM1EG35200A GM1EG55200A LT1E97A LT1E67A LT1F67A LT1F67AF LT1E40A GM5EG95200A GM4EG81200A LT1E45A
19 19 23 23 19 18.1 20 29 GM1HY55200A LT1H97A LT1H67A LT1H40A
LT1K67A LT1K40A
3.8 5
Resin type Colorless transparency Colored transparency
S HS
Luminous intensity (mcd) TYP.
D HD
Luminous intensity (mcd) TYP.
U UR
Red (HL) Luminous intensity (mcd) TYP.
P
Luminous intensity (mcd) TYP. 1.6 1.3 1.3
Milky diffusion
Outline dimensions (mm)
Colored diffusion
Sunset orange
Red
Red
1.6 x 0.8 (T: 0.55) 1.6 x 0.8 (T: 0.6) 1.6 x 0.8 (T: 0.8) 2.0 x 1.25 (T: 0.8) 3.2 x 2.8 (T: 1.9)
*1 P (Red) series: IF = 5 mA

GM1HS55200A LT1S97A LT1S67A LT1S40A
11.4 8.2 6.9 9.4
GM1HD55200A LT1D97A LT1D67A LT1D40A GM5HD95200A
12.5 11 8.8 11.9 13.8
GM1UR55200A LT1U97A LT1U67A LT1U40A GM5UR95200A
29.7 35.3 29.7 35.6 80
LT1P97A LT1P67A LT1P40A
HL: High-luminosity
LT1D67A series LT1ZR67A series LT1JS67A series GM1ZV80300AE series
LT1D97A series
GM1EG55200A series GM1JV55200AE series GM1BC55250AC series
LT1E40A series LT1ZE40A series GM1JV40300AE series GM1ZV40300AE series
GM1JV35200AE series GM1EG35200A GM1BC35200AC series GM1BC35310AC
LT1E45A series LT1JV45A series GM4BC13300AC series
GM4JV81200AE series GM4EG81200A GM4BC81250AC series
LT1ZR95A series GM5JV95200AE series, GM5EG95200A series GM5BC95200AC series, GM5BC95250AC series
GM5ZR01200A series, GM5BC01200AC series GM5BC01250AC series, GM5YV01210A series
GM5ZV03200Z series GM5BC03200Z series
Taped model
102
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LED
HIGH-LUMINOSITY DICHROMATIC TYPE CHIP LEDs (Taped models only) (I F = 20 mA, [Blue, Green: I F = 10 mA], Ta = 25C)
Resin type Outline dimensions (mm) 1.6 x 1.6 (T: 0.8) Milky diffusion Colored transparency Colorless transparency
CHIP LED
Under development
ZV BC
Amber + Blue Luminous intensity (mcd) TYP. 43.8/14.4
ZS GC
Sunset orange + Green Luminous intensity (mcd) TYP. GM1ZSG80300A 66/46.1
(I F = 40 mA, Ta = 25C)
Colored diffusion
GM1ZVB80300A
Resin type Outline dimensions (mm) 6.0 x 5.0 (T: 2.5) Milky diffusion Colored transparency Colorless transparency
BC GC
Blue + Green Luminous intensity (mcd) TYP. 300/860
BC ZR
Blue + Red Luminous intensity (mcd) TYP. 300/580
GC ZR
Green + Red Luminous intensity (mcd) TYP. 860/580
Colored diffusion
GM5BG01210A
GM5ZRB01210A
GM5ZRG01210A
DICHROMATIC TYPE CHIP LEDs (Taped models only)
Resin type Outline dimensions (mm) 1.6 x 1.6 (T: 0.8) Milky diffusion Colored transparency Colorless transparency
(I F = 20 mA, Ta = 25C)
EH
Yellow-green + Yellow Luminous intensity (mcd) TYP. LT1EH67A 19/8.3
ED
Yellow-green + Red Luminous intensity (mcd) TYP. LT1ED67A 19/8.3
Colored diffusion
GM5BG01210A series
LT1ED67A series GM1ZVB80300A series
HIGH-LUMINOSITY WHITE TYPE CHIP LEDs (with blue chip) (Taped models only) (Ta = 25C)
Outline dimensions (mm) 3.2 x 2.8 (T: 1.9) 6.0 x 5.0 (T: 1.5) 6-terminal leadless 6.0 x 5.0 (T: 2.5) 4-terminal leadless
*1 GM5BW95300A: IF = 20 mA
Color coordinates (x, y)
BW
Radiation color White Luminous intensity (mcd) TYP. 1 100 4 200 1 800
(0.31, 0.3) (0.31, 0.31) (0.31, 0.31)
White White White
GM5BW95300A* 1 GM5BW01300A* 3 GM5BW01301A* 2
*2 GM5BW01301A: IF = 40 mA
*3 GM5BW01300A: IF = 35 mA/chip
GM5BW95300A
GM5BW01300A
GM5BW01301A
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
103
LED
CHIP LED
WHITE TYPE CHIP LEDs (with blue-violet chip) (Taped models only)
Outline dimensions (mm) Color coordinates (x, y)
(I F = 40 mA, Ta = 25C)
LED
New product Under development
VA
Radiation color Luminous intensity (mcd) TYP. 450 (700) (350) (900)
(0.33, 0.33) 6.0 x 5.0 (T: 2.5) 4-terminal leadless (0.34, 0.40) (0.29, 0.27) (0.30, 0.50)
White Yellowish white Purplish white Greenish white
GM5VA33331AC
GM5VA34400AC GM5VA29270AC GM5VA30500AC (
) indicates reference value.
GM5VA33331AC
HIGH-LUMINOSITY DICHROMATIC TYPE CHIP LEDs (RGB 3-color) (Taped models only) (Ta = 25C)
Resin type Colored transparency Colored diffusion Milky diffusion Outline dimensions (mm) 1.6 x 1.6 (T: 0.55) 1.6 x 1.6 (T: 0.8) 6.0 x 5.0 (T: 2.5) 4-terminal leadless Colorless transparency
WA
Red + Green + Blue Luminous intensity (mcd) TYP.
GM1WA55360A*1

GM1WA80350A*2 GM5WA02200A*3 GM5WA06203A*3 GM5WA06210A*4 GM5WA06250A*5 GM5WA06260A*3 GM5WA06270A*6 GM5WA06200Z*3 GM5WA06203Z*3 GM5WA06250Z*4
GM5WA05360A*6
125/150/55 80/92/30 850 [Mixed color] 850 [Mixed color] 250/400/350 1 400 [Mixed color] 1 725 [Mixed color] 3 000 [Mixed color] 850 [Mixed color] 850 [Mixed color] 1 400 [Mixed color] 2 200 [Mixed color]
6.0 x 5.0 (T: 2.5)*7 6-terminal leadless
6.0 x 5.0 (T: 2.3 [resin part]) 6-terminal 6.0 x 5.0 (T: 1.5) 6-terminal leadless
*1 *2 *3 *4 *5 *6 *7
GM1WA55360A: IF = 10 mA (Red, Green, Blue) GM1WA80350A: IF = 20 mA (Red), IF = 10 mA (Green, Blue) GM5WA02200A, GM5WA06203A, GM5WA06260A, GM5WA06200Z, GM5WA06203Z: IF = 40 mA (Red, Green), IF = 20 mA (Blue) GM5WA06210A: IF = 40 mA (Red, Green, Blue) GM5WA06250A, GM5WA06250Z: IF = 35 mA (Red, Green), IF = 20 mA (Blue) GM5WA06270A, GM5WA05360A: IF = 35 mA (Red, Green, Blue) GM5WA06270A: T: 2.4 mm
GM1WA55360A
GM1WA80350A
GM5WA02200A
GM5WA06203A GM5WA06210A GM5WA06250A GM5WA06260A
GM5WA06200Z GM5WA06203Z GM5WA06250Z
GM5WA06270A
GM5WA05360A
104
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Except where specially indicated, models listed on this page comply with the RoHS Directive*. For details, please contact SHARP. *RoHS Directive: Prohibits use of lead, cadmium, hexavalent chromium, mercury and specific brominated flame retardants (PBBs and PBDEs), with certain exceptions. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
LED
Model No. GW01M59001PE
LEDs FOR CAMERA DATA BACK / LED DRIVERS
Under development
(I F = 1 mA, Ta = 25C)
LEDs FOR CAMERA DATA BACK
No. of dots 7 Outline dimensions (mm) 2.6 x 2.9 (T: 0.9) Surface-mount type Radiation color Amber
Luminous intensity (mcd) (MIN. 0.4 TYP. 0.8)
( ) indicates reference value.
GW01M59001PE
LED DRIVERS
Model No. Description Function
* Output current (constant-current sink outputs) : 30 mA (MAX.) (setup by external resistor) * Graduation function (clock cycle setting or external synchronization) * Independent current control for three systems (for RGB LED) * LED drive voltage : 15 V * Rated output voltage : 20 V (MAX.) * fCLK : 20 MHz (MAX.) /16.6 MHz (MAX.) (at cascade connection) * Output current (constant-current sink outputs) : 60 mA (MAX.) (setup by external resistor) * Rated output voltage : 7 V (MAX.) * fCLK : 20 MHz (MAX.) /16.6 MHz (MAX.) (at cascade connection) * Output current : 155 mA/ch (MAX.) (3ch) (in flash mode) * Control by I2C bus * Illumination mode (64 levels/ch) * Flash mode (32 levels/ch) * Brightness adjustment * Output current : 20 mA (MAX.) (setup by external resistor) * Independent current control for two systems (4 outputs and 2 outputs) * LED non-connected judging function * Brightness adjustment * Output current : 20 mA (MAX.) * LED non-connected judging function * Brightness adjustment
Supply voltage (V)
Package
IR2D20N/U
24-dot LED panel driver with constant-current sink outputs
4.5 to 5.5
P-SSOP056-0600/ P-HQFN052-0707
IR2D07N1
16-dot LED panel driver with constant-current sink outputs
3.0 to 5.5
P-SSOP040-0300
IR2E46U6/Y6
RGB LED driver for flash lights and illuminations
2.7 to 4.5
P-VQFN032-0505/ WL-CSP*1
IR2E47U6
White LED driver for back light
P-VQFN024-0404 (*2) 2.7 to 5.5 P-VQFN024-0404
IR2E48U6
*1 WL-CSP : Waferr-level CSP *2 Contact a SHARP sales office regarding a wafer-level CSP.
Notice In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that may occur in equipment using any SHARP devices shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest device specification sheets before using any SHARP device.
105
LED

▲Up To Search▲

Price & Availability of IR2E46U6

	To Download IR2E46U6 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .